2-1/2" 15Gauge Finish Nailer
Model NT 65MA2



 

 


$ ***.**

  
Equipped with the same output mechanism
  as the NT65MA that well reputed with its rapid
  driving response, good balance and 4.4 lbs. light
  weight for easy one-handed operation
Equipped with SINGLE ACTUATION /
   CONTACT ACTUATION switching device to
   meet the requirements of NEW ANSI
   SNT-101-2002
Simple drive-depth adjusting mechanism
Easy-to-use clogged nail release mechanism
360°exhaust direction easily changeable
Capable of cleaning chips and sawdust of course
   it drives nails thanks to the blow nozzle
Rubber grip for comfortable handling
High capacity rear load magazine (15-gauge finish nail:100pcs)
A FULL SEQUENTIAL ACTUATION MECHANISM KIT
   is also available as an option (Code No.884320)

Specifications:
 
Actual Weight  2.0kg (4.4 lbs.)
Dimentions
(L x H x W)		  344mm x 304mm x 82mm
(13-17/32" x 11-31/32" x 3-7/32") 
Operating Pressure 5 - 8.5kg/cm²(70-120psi)
Air Consumption  1.20 ltr/cycle at 7 kgf/ cm²
(0.042 ft3　 /cycle at 100psi)
Magazine Capacity  100pcs.(15-gauge finish nail)
Applicable Nail
(15-gauge finish nail) 		  Angle  34 degrees
Collation Tapes
Diameter  2.4mm - 3.0mm (0.095"  -   0.12")
Length 32mm - 65mm (1-1/4"  -   2-1/2")
Standard Accessories  1 Safety glasses
 2 Wrenches
 1 Nose Cap (A)
 1 Case