3-1/2"Strip /Round-Head Nailer  
Model NR 90AC3



 

$ ***.**

  
Equipped with the same output mechanism
  as the NR90AC2 that well reputed with its rapid 
  driving and quick response, good balance
Equipped with SINGLE ACTUATION / 
  CONTACT ACTUATION
  switching device to meet the requirements of 
  NEW ANSI SNT-101-2002
High capacity rear-loading aluminum magazine
Barbed nose for easy toe nailing
Tool-less depth adjusting mechanism
Rubber grip for comfortable handling
Equipped with a dust filter in air inlet
Equipped with a pushing lever stopper(idling ptotector)
A FULL SEQUENTIAL ACTUATION MECHANISM KIT
   is also available as an option(Code No.884142)

Specifications:
Actual Weight  4.0kg (8.9 lbs.)
Dimentions(L x H)  503mm x 353mm x 121mm
(19-13/16" x 13-7/8" x4-3/4") 
Operating Pressure 5- 8.5 kg/ cm² (70 - 120psi )
Air Consumption  2.7 ltr/cycle at 7kgf/cm²
(0.095 ft³/cycle at 100psi)　
Magazine Capacity  50 to 60 nails,(2strips)
Applicable Nail
(Round-Head) 		  Angle  20 degrees
Collation Plastic
Diameter  2.9 - 4.1mm(0.113" - 0.162")
Length 60 -  90 mm(2-3/8" - 3-1/2")
Standard Accessories 1 Safety glasses
3 Wrenches (for M5,M6,M8 Bolt)
1 Nose cap